Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. However, if you have double glazed window repairs near me-pane windows that are secured by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need to source some plastic spacers that will assist the new pane to fit correctly into the window frame.

If you plan to try to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repair is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems such as sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. With a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you aren't able to move the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC hand. First, you'll need close the window and perform an initial test fit. The corners of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with a breeze. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like all mechanical parts hinges will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier to do with someone else to help hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more smoothly. It can also reduce the chance of windows getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, creating an opening where the sash and frame meet. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to have them realigned or replaced. Second, the interlock can also become unbalanced. It is located on the hinge's side and might require to be cleaned. In some instances it is possible to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it could be cheaper to replace them instead of fixing them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.